BLACKRIDGE Solutions
  • Home
  • Lone Worker Safety
    • G7c
    • BRIDGE & G7x
    • Loner MOBILE
  • Gas Detection
    • G6 Single Gas
    • G7 EXO
  • 24/7 Monitoring
  • Store
  • Contact Us
  • Blog
  • About Us
    • Press Release
  • Workplace Safety
  • Gas Detectors

Gas Detection Safety 101: Proper Calibration and Bump Testing

2/17/2023

0 Comments

 
Gas detection is one of the most important measures taken to keep employees and workplaces
safe from dangerous levels of dangerous gases. Gas detectors are designed to detect the
presence of hazardous gases and alert users when harmful levels are present in the
atmosphere. It is essential that gas detectors are properly calibrated and bumped tested to
ensure that they give accurate, repeatable readings. This article will provide an overview of gas
detection essentials, including an explanation of proper calibration and bump testing to ensure
lone worker safety.

What is Gas Detection Safety?

Gas detection safety, also known as combustible gas detection or atmospheric monitoring, is
the process of monitoring combustible or toxic gases, vapours, and oxygen levels in the
atmosphere. Monitoring the atmosphere for these dangerous gases is essential to ensure the
safety and health of workers and prevent hazardous conditions.

Calibration of Gas Detectors

Calibrating a gas detector is the process of ensuring that the detector is working correctly and is
able to detect dangerous gas levels accurately and reliably. Proper calibration is essential for
ensuring the safety of workers and ensuring the accuracy of the readings.
Calibration should be done on a regular basis, depending on the type of detector and the
manufacturer’s recommendations. Generally speaking, a gas detector should be calibrated at
least once a year. Calibration kits are available and should be used to calibrate the gas
detector.

Bump Testing of Gas Detectors

Bump testing is another essential part of gas detection safety. Bump testing is the process of
testing a gas detector’s ability to accurately detect dangerous gases. Bump testing is performed
by exposing the detector to a known concentration of the gas that the detector is designed to
detect.

The detector’s response is then measured to ensure that it is responding correctly and
accurately detecting the gas. Bump testing should be done regularly, such as before use or at
the beginning of each day, to ensure that the detector is working correctly and can accurately
detect dangerous gas levels.

Why is Gas Detection Safety Important?

As far as lone worker monitoring systems go, gas detection safety is essential for protecting
workers from potential health and safety hazards associated with combustible or toxic gases.

Exposure to combustible or toxic gas levels can lead to a variety of health problems, such as
asphyxiation, nausea, vomiting, dizziness, headaches, and irritability. In some cases, exposure
can even be fatal. Therefore, having the proper gas detection safety measures in place is
essential for protecting workers and preventing hazardous conditions
.
Conclusion

Gas detection safety is essential for ensuring a safe, secure, and healthy work environment.
Proper calibration and bump testing of gas detectors are an integral part of maintaining a safe
workplace. This article discussed the importance of gas detection safety, as well as providing a
guide to proper calibration and bump testing. Following these guidelines can help to ensure the
safety of workers and prevent hazardous conditions.

BLACKRIDGE Solutions is an industry leader when it comes to lone worker safety and gas
detection solutions. Our solutions combine advanced tracking technology with intuitive user
interfaces to deliver real-time monitoring, location-based alerts, and remote supervision. Our
range of products can be tailored to meet the needs of any industry, ensuring that workers are
safe and protected at all times. Contact us today to learn more about our lone worker safety protection devices and gas detection solutions. ([email protected])
gas detectors
bump and calibration
gas detectors
gas detector with pump
0 Comments

Your comment will be posted after it is approved.


Leave a Reply.

    Archives

    March 2025
    February 2025
    December 2024
    November 2024
    October 2024
    September 2024
    August 2024
    July 2024
    June 2024
    May 2024
    April 2024
    March 2024
    February 2024
    January 2024
    December 2023
    November 2023
    October 2023
    September 2023
    August 2023
    July 2023
    June 2023
    May 2023
    April 2023
    March 2023
    February 2023
    September 2022
    June 2022
    May 2022
    February 2022
    January 2022
    October 2021
    July 2021
    April 2021
    September 2020
    July 2020
    April 2020
    March 2020
    September 2019
    February 2019
    January 2019
    November 2018
    September 2018
    June 2018
    March 2018
    November 2017
    October 2017
    May 2017
    April 2017
    March 2017
    February 2017
    January 2017
    December 2016
    November 2016
    October 2016
    September 2016
    August 2016
    July 2016
    May 2016
    March 2016
    February 2016
    December 2015
    November 2015
    October 2015
    August 2015
    July 2015
    June 2015
    May 2015
    April 2015
    March 2015
    February 2015
    January 2015
    August 2014
    July 2014
    April 2014
    February 2014
    January 2014
    December 2013
    November 2013
    October 2013
    September 2013
    August 2013
    July 2013
    June 2013
    May 2013
    March 2013

    RSS Feed

Copyright © 2025 BLACKRIDGE Solutions Inc. All rights reserved.